How To Drain Pentair Pool Filter

When Should I Drain My Pond Pool?

In cases where your water has a loftier level of Total Dissolved Solids (TDS), a Compression A Penny expert may recommend that you bleed some h2o from your puddle and add together fresh h2o.
If you know that a large tropical storm or hurricane is approaching, you may also want to drain some water to forestall overflow.
In the outcome you demand a repair or resurfacing, the techs will accept care of this procedure.

Regardless, consult with an proficient first earlier deciding to take h2o out. These steps apply to inground and above footing pools, every bit well every bit saltwater and chlorine-treated pools. If you decide this is a necessary step, this article volition testify y'all how to bleed h2o out of your pond pool, regardless of what type of filter you have.

Alarm: We practice not recommend you drain a pool past the skimmer line. Doing this may cause your pump to run dry, damaging or destroying it.

How to Drain A Pool with a Cartridge Filter

For those pools that accept a cartridge filter, there are two ways to achieve this.

one. Using the Drain Plug

Close off the pump.
Get to the back of the filter and unscrew the drain plug.
Turn the pump back on and let the water run until it reaches the point where you desire to bleed the water out.
Turn the pump back off and put the plug back into the bleed plug.

two. Using the Drain Valve- If your organisation has a valve in between the pump and the filter.

Shut the pump off and rotate the valve then that it blocks the h2o going to the filter.
Plow the pump on and the water volition come up out of the opening.
When you get to the bespeak where you've taken out enough water, turn the pump off and plough the 3-fashion valve dorsum to the regular position. This manner h2o can laissez passer from the pump into the filter again.

How to Drain a Pool with a Sand Filter

Turn the pump off.
Curl backwash hose out into the chiliad or approved draining area.
Rotate the multiport valve on the top or side in a clockwise direction to the "Waste" position.
Turn the pump dorsum on.
After y'all get the correct corporeality of water out of your swimming pool, turn the pump back off.
Rotate the multiport valve from the "Waste" position, in a clockwise direction, back to "Filter."
Pick the backwash hose upward to help bleed all the water out and curlicue it back upwardly.

How to Drain a Puddle with a DE Filter

Manually close the pump off at the breaker box.
Turn the multiport valve in a clockwise direction until y'all get to "Waste material".
Turn the pump back on.
When you've taken enough water out of the swimming pool, turn the pump off.
Rotate the handle on the multiport valve in a clockwise direction until you get back to "Filter."
Plow the pump back on.

If you accept any other questions, delight call your neighborhood Pinch A Penny. Click below to find a shop almost you!

Find A Pinch A Penny Near You